EPC Sensor
Sejong Technology is preparing for the core part production business, which is the industry of the future, through over 5 years of investment. We will upgrade the technology of automation equipment production in Korea through the development of high-function sensors and high-function controllers.
EPC Sensor 4CH
Edge Instrumentation Sensor(Laser Parallel Light Type)
MERCURY Series MES07-FC(4CH)
MERCURY Series MES07-FC(4CH)
| Item | Sensor Head | Controller |
|---|---|---|
| Model No. | MES07-MLX | MES07-FC(4CH) |
| Measuring Width | 7mm | |
| Measuring Distance | 10~300mm | |
| Measuring Interval | 500㎲(2㎑/S) | |
| Movement | ±20㎛ 以下 * ¹ | |
| Repetition | ±1㎛ 以下 * ² | |
| Operating Temperature | 0 ~ 50 °C | |
| Operating and Storage Temperature |
30 ~ 85% RH | |
| Data Display | - | 4 Digit FND by CHX 4 |
| Event Output | - | Sink-type Transistor Output 8 Output |
| External Input | - | 4 Input |
| Analog Output | - | Select 0~5V / ±5V / 0~10V / ±10V |
| Power | 5VDC±10% | 12 ~ 30VDC±10% |
| Material | Case:Aluminum, Lens:glass | Case:ABS |
| Light Source | Visible Semiconductor Laser: CLASS I 650mm | - |
| External Communication | RS422 | RS422 / CUNET / ETHERNET / CAN * ³ |
*1 : Distance between thru-beam=20㎜, WD=10㎜, Location of target object= When moving 0.5mm from the center of measuring width
*2 : Distance between thru-beam=20㎜, WD=10㎜, Location of target object= When averaging 20 times at 3.5mm from the center of measuring width
*3 : Enabled when selecting option boards
*2 : Distance between thru-beam=20㎜, WD=10㎜, Location of target object= When averaging 20 times at 3.5mm from the center of measuring width
*3 : Enabled when selecting option boards
Linear Image Sensor
Since it uses CMOS sensor with light receiving element, it does not receive the impact of contamination in principle compared to the type used PD as light receiving element.
Although overall light receiving amount is lowered by the contamination, the measuring position does not change.
If the dirtiness detection alarm function is used, alarm is generated according to the contamination setting.
Although overall light receiving amount is lowered by the contamination, the measuring position does not change.
If the dirtiness detection alarm function is used, alarm is generated according to the contamination setting.
Function to Ignore Edge of Target Object
The function to ignore edge is the function to hold the analog output to prevent the change of analog output responding to the tab when there is tab around the target object such as electrode.
The function to ignore uses the function by setting the time that the edge of the target object passes the sensor and the size to be ignored.
Delay Time: 0.5ms ~ 127ms
Ignoring Size: 0 ~ 7mm ( 0 : Not ignored)
The function to ignore uses the function by setting the time that the edge of the target object passes the sensor and the size to be ignored.
Delay Time: 0.5ms ~ 127ms
Ignoring Size: 0 ~ 7mm ( 0 : Not ignored)
Measurement of Curve and Width of Film / Sheet
The curve and the film width can be measured at the same time with 2 sensor heads using the calculation function between sensor heads.
Measurement of Eccentricity of Wafer and Location of Notch
It can measure the eccentricity and the location of notch in the highly transparent wafer stably.
Measurement of Thickness of Film / Sheet
It can measure the exact thickness by connecting 2 sensors to the controller and measuring roller and sheet at the same time.
Product Configuration
External Dimension - Sensor Head
External Dimension - FND 4CH Controller
